A thermal imaging camera is equipment that is used to detect objects that are not visible in the eyes. It is a temperature-sensitive tool that functions on infrared (IR) radiation. It can even detect the objects that a normal camera fails to do.
A question can appear: can we avoid such a tool? The answer is yes, we can avoid thermal imaging. Then how to stop thermal imaging camera? You can do this by blocking the infrared (IR) radiation or by putting a barricade in between the camera and the object. Follow up the 8 effective steps described in the article to stop a thermal imaging camera.
Table of Content:
The following part of the article will provide you with a crystal clear idea about the capabilities of the thermal imaging camera. You will also get to know ways to stop it.
How Far Can Thermal Cameras See?
A thermal camera can see between the wavelength range from 1000nm to 14000 nm. Since a thermal camera is temperature-sensitive it sees objects based on the temperature level. The information becomes more detailed if the object is warm. Unlike the normal camera, it can perceive temperature differences of 1°C or the air temperature around 0.020°C to 0.075°C. But it depends on the temperature sensitivity level that differs from camera to camera.
The colder objects are seen as darker ones and the warmers are seen as comparatively lighter ones. But if the temperature of a particular object does not meet the requirements then it can not be seen through it. We can not see snakes or any cold-blooded animals with this camera.
Normal cameras can see from 400 to 700 nm. The capacity of a thermal imaging camera is far more than that of the normal one. It can be used for underground investigation at around 5 feet. However, people use it for 25 feet too but it does not serve the accurate measurements in this case. The more temperature-sensitive the camera is the more accurate the information is served.
Thermal imaging cameras are best for detecting game objects at night. The high vision of the camera prevails the accurate details for most of the time. As this camera can inspect a huge number of points in the object, it works better than a normal camera. You can use a thermal imaging camera for home inspection” too.
Generally, a thermal imaging camera is used for law enforcement and safety. Copes use the camera for finding hidden burgers and criminals. However, people use it for other purposes too. The camera is used in detecting firefighting, search and rescue, drug busts, and maritime navigation.
How to Stop a Thermal Imaging Camera?(Step by Step)
Above we describe how far a thermal imaging camera can see? Now the question is how to stop Thermal Imaging Camera? You can stop a thermal camera by blocking the infrared radiation. The thermal imaging cameras record the infrared light (IR) that passes through an object. The infrared spectrum (IR) radiates through almost every surface. It inspects the object temperature on the surface and air.
Except for cold-blooded animals, every warm object is placed anywhere it can be visible. If we even connect a wire with a thermal resistor, we will see the wire (the radiation of IR). However, there are some steps that you can follow to stop the imaging camera with.
Step 1: Using a Thick Blanket
A thick blanket blocks your heat signature to disclose. Blankets can be the best stuff to camouflage you from a thermal imaging camera. If you cover yourself with a thick blanket, it will prevent the infrared heat your body produces.
Step 2: Using Glasses
Glasses always act as insulators. If you want to avoid the thermal imaging camera, you can use a glass or thick plastic in front of you. Glasses are insulators. No spectrum can pass through it. So, if you put a glass or thick plastic before you, it will prevent the IR spectrum from passing through and making yourself visible.
Step3: Using Mylar Blankets
Mylar blankets or foils impede your heat signatures to get noticeable. Mylar blankets or foils block the heat flow. If you put an aluminium foil before an object, the thermal imaging camera will not be able to see through it. These act like barriers to the camera that it can not detect the desired object.
Step 4: Using Netting Materials
Netting or webbing materials spread the heat so that the heat can not form a contour. Netting materials have pores in them. The pores disperse the IR (infrared light) radiation. When you use a netting material for concealment, it works the best. It is capable of dispersing the heat that accumulates in one certain place.
Step 5: Wearing an Insulated Outfit
Insulators do not let the thermal imaging camera see-through them. If you wear a jacket that is insulated then you can hide from the thermal camera. Thermal imaging cameras focus on the heated object. When you leave your heat signature on something, it detects. But if you dress in an insulated outfit then it will be hard for the camera to detect you.
Step 6: Putting Barricades Between The Object and The Camera
If there is any impediment between the object and the camera, the visibility fades away.
If you use a tree or wall in between the object and camera then those will block the camera. The cameras can not function if there are barricades. If you want to be masked from thermal imaging you can use a tree or wall as barricades.
Step 7: Getting Blended With Another Heat Source
If you blend yourself with another heat source, the thermal imaging camera will fail to inspect you. If there is an object near you that is equally as warm as your body, connect with it. If you do so the IR heat will be spread through and it will form your shape. The camera will not be able to discover you.
Step 8: Wearing a Ghillie Suit or Mud
Ghillie suits also save you from getting disclosed to a thermal camera. Ghillie suits do not work permanently but they temporarily do not let body heat contour your shape. You can also try wearing mud. It also works as an insulator to infrared radiation.
There is another way that you can adopt. You can move continuously. The camera is capable of discovering things that standstill. If you move spontaneously it will fail to detect you.
So, these are the steps that you can adopt if you want to stop a thermal imaging camera.
Final Thought
A thermal imaging camera is used to detect an object that is not always visible in the eyes and normal cameras. Every object or living thing that has the minimum temperature required gets caught is a thermal imaging camera. The heat produced by the body of the object contours the points of the object. Hence, the camera succeeded to inspect it.
You will find the answer to how to stop thermal imaging camera if you go through the article. Certain steps will provide the idea of concealment from a thermal imaging camera. You can easily block the IR radiation flow and camouflage yourself by following those step
